Sixteen Gallon Drum Pump
w/ Hose & A10

The Filter Pumper was designed for nearly all sixteen gallon drums, whether metal or plastic.

The unique design allows the Filter Pumper to fit into the drum’s two inch bung, the drum bung adapter seals on the threads to prevent spills and contamination.

The patented Filter Pumper design moves fluids twice as fast as other pumps because the pump works on both the up and down (complete) stroke.

Five gallons of fluid can be pumped in about two and a half minutes even through a filter.

The hose latch on the Filter Pumper’s head was designed to keep the fittings and cap off of the ground and out of the dirt.

The H06 Filter Pumper hose is made from top quality gas/oil resistance tubing, it will remain flexible even in cold temperatures.

The hose is six foot long and comes standard with crimped brass fittings that are 3/8 NPT.

The hand made A10 accessory comes attached to this pump’s hose. The A10 is a hooked copper filling spout with a cap and a ball valve shut off.

All machinery, equipment, or vehicles that use petroleum based or synthetic oils can be filled with ease using the Filter Pumper.

Fluids with a wide range of viscosities can be easily transferred and filtered. Oil types include but are not limited to: hydraulic fluid; motor oil; transmission fluid; 80/90 weight gear lubes; and turbine oils.

Filter Pumper products are hand assembled in Days Creek, Oregon, USA to ensure top quality.